Zynq UltraScale+ XCZU5EG-1SFVC784 MPSoC
• Quad core ARM Cortex-A53, Dual R5 processors
• DDR4 memory controller with 8 DMA channels and 4 High Performance AXI3 Slave ports
• High-bandwidth peripheral controllers: 1G Ethernet, 2x USB 3.0, DisplayPort
• Low-bandwidth peripheral controllers: 2x each SPI, UART, I2C
• Programmable from JTAG and MicroSD card
• 256,200 system logic cells, 234,240 Flip-Flops and 117,120 LUTs
• 5.1 Mb total block RAM, 18.0 Mb ultra RAM
• 1,248 DSP slices
• On-chip analog-to-digital converter (XADC)
Memory
• 4GB DDR4 2400R (64 bits wide)
• MicroSD slot
USB and JTAG
• Micro USB-JTAG programming circuitry
• Micro USB-UART bridge
• USB 3.0 OTG PHY (supports host only)
• USB Composite 3.0
Audio and Video
• HDMI 2.0 sink port (input)
• HDMI 2.0 source port (output)
• Mini Display Port
• I2S interface with 24bit DAC with 3.5mm TRRS jack
• Line-in with 3.5mm jack
Switches, Push-buttons and LEDs
- PL
• 4 push-buttons
• 4 slide switches
• 4 LEDs
• 2 RGB LEDs
- PS
• 2 LEDs
• 1 push-button
Expansion Connectors
• 2 standard Pmod ports and 1 TPM Pmod
• CSI
• FMC LPC
• 2 SYZYGY standard ports
Raspberry Pi connector
• 28 Total FPGA I/O pins